2024 Exmark LZS749AKC724A1 72" KOHLER
$15,499.00
Key Features
Product Features
Description
With the top-rated Lazer Z S-Series of zero-turn rider mowers, you can choose from Kawasaki and Kohler engines, including an eco-friendly, Electronic Fuel Injection (EFI) option. UltraCut™ Series 4 cutting deck sizes available include 52, 60, or 72 inches. And for increased durability, the deck is made of a 10-gauge steel, formed, and continuously seam-welded top and a 7-gauge side skirt. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
Select Lazer Z S-Series models offer Smart Controller. This easy-to-use interface has a wealth of user data like fuel level, interlock status, PTO and total hours, maintenance reminders, and machine health status. Like our full lineup of zero-turn mowers, the Lazer Z S-Series offers unparalleled durability and precision maneuverability. Be sure to check out the rest of the Lazer Z family of mowers, like the Lazer Z X-Series zero-turn mowers.
- Less Time At The Pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location.
- Built to Last: Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
- On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
- Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
- Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
- Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
- Onboard Intelligence: Smart Controller
- Starter: Electric
- Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Caster Forks: .50 in. thick caster yoke arms.
- Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
- Drive Tires: 24 x 12-12, 4 ply Turf Master®
- Parking Brake: Lever-actuated disc brake.
- Tractor Frame: Unibody, welded, heavy-duty 1.5 in. x 3 in. tubular steel.
- Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75 in.-diameter cutter housing with 25mm(.98 in.) diameter spindle shaft and splined blade driver.
- Electrical: 12-volt battery with 20-amp alternator.
- Standard Features: Engine hour meter and cup holder
- Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Transmission Speeds: Infinitely Variable
- Engine Brand: KOHLER
- Engine Brand: Kohler
- Engine Model: ECV749
- Engine Displacement: 747
- Transmission: Hydrostatic
- Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
- Engine Series: Command™ EFI
- Engine Spec: 3064
- Engine Speed: 3,750 RPM
- Drive: Hydro-Drive
- Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
- Air Filter: Heavy-duty canister air filtration system
- Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
- Fuel Type: Gas EFI
- PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
- Fuel Indicator: Yes - electronic Sender
- Drive Wheel Release: Allows unit movement without engine running.
- Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Carb Compliant: No
- Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS: 2-post foldable ROPS standard with seat belt and latch.
- Deck Style: Floating Deck
- Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Width / Cutting Deck: 72 in.
- Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
- Cutting Heights: 1.0 in. (2.5 cm) to 5.5 in. (11.8 cm) in 0.25 in. (0.64 cm) increments adjustable from operator's seat.
- Blade Tip Speed: Approximately 18,500 fpm.
- Blades: 3 Blades at 24.50 in. Length
- Width: 84.9 in. (215.6 cm)
- Height: 70.5 in. (179.1 cm)
- Length: 86.1 in. (218.7 cm)
- Curb Weight: 1250
- Hitch: Enables owners to add attachments to their mowers to increase productivity by towing light implements and yard carts.
- 12-Volt Power Adapter: Conveniently located for ease of use. Great for phone chargers or any other operator comfort accessory. (Phone not included.)
- Harness Add-On Accessory Kit: Take the hassle out of dual accessory fit up with this add-on harness.
- Extended Drive Levers: Improve your elbow room while you operate with extended drive levers.
- Light Kit: Keep mowing after the sun goes down with brilliant, 27-watt halogen power from this Hella® Work Lamp Kit. Easily mounted to your ROPS bar, the highly durable lenses repel dust, withstand impact, and can even take on high- pressure cleaning. With twice the illumination output of a conventional work lamp, the kit also features a pivot base and easy bulb replacement.
- UltraVac Completing Kit: KIT, UV DRIVE 724 SPLINED 920,000 +
- Power Deck Lift: Change your deck from any cutting height to the transport position quickly and easily, with a convenient foot pedal actuator switch that lets you keep your hands safely on the drive levers. Created specifically for your 48-72" cutting deck Lazer Z, its electronic motor features Exmark's signature durability and a low-profile design that leaves plenty of trailer space.
- Floor Mat: Keep your Lazer looking its best by protecting the floorpan from scuffs and dirt. Fits all Lazer models (model year 2009 and higher).
- Turf Striper: Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.
- Operator Controlled Discharge (Foot): The infinitely adjustable blocker door opens and closes by using the convenient foot pedal, allowing the operator to quickly control discharge when mowing around parked cars and windows. Easily installs and removes without tools.
- Air Ride Suspension Seat: Designed to fit all Lazer Z models, the new air ride seat gives you the best comfort available. Sophisticated air suspension technology virtually eliminates any bumps, jarring or vibration your property delivers.
- Full Suspension Seat: This low-profile, full- suspension seat enhances operator comfort and lumbar support by adjusting to individual weight.
- Sun Shade: Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)
- Hydro Maintenance Kit: Kit includes: 1 gallon jug of Exmark® Premium Hydraulic Oil and 2 Hydro Filters (Replaces 116-3270)
- Jack: Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).
- Wiring Harness Relay: WIRING HARNESS RELAY
- 12-Volt Power Port: 12-Volt Power Port
- Tractus Tire: Tractus Tire
- Light Kit, LED (not compatible with TC26): Light Kit
- Slope Sensor: Slope Sensor Kit
- Operator Controlled Discharge Lever, Foot (Requires 142-8181): KIT, OCD PEDAL
- Operator Controlled Discharge Gate & Cable Assembly: Operator Controlled Discharge Lever (Foot)
- UltraVac Collection System, 3 Bag: The UltraVac S-Series enables you to switch between bagging and side discharge with quick-attach capability. Avoid clogging with larger diameter tubes. Compact design minimizes trailer space for easy maneuverability. Sealed hood reduces dust.
- UltraVac Quick Dump Collection System: The UltraVac X-Series discharges grass quickly with one simple motion of the release lever. With commercial-grade steel and polyethylene hopper Get the job done efficiently with rear-discharge door, and 11 bushel capacity.
- Micro-Mulch System: The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.
- Trash Container (Not compatible with 135-7320): Conveniently located within easy reach of the operator, this trash container features a 2.5-gallon capacity and durable, easy-to-clean mesh receptacle. See dealer for fit- up information.
Engine
Engine Manufacturer | Kohler |
Engine Type | ECV749 |
Displacement | 747cc |
General
Transmission | Hydro-Drive |
Wheel Size | 24 x 12-12, 4 ply Turf Master® |
Fuel Capacity | 12 gal. (45.4 L) |
Deck
Deck Size | 72 in. |
Discharge Type | Side; Optional: Bag, Mulch |